Vista Loader 1.0, or more commonly known as softmod.iso or softmod-l.iso software based Windows Vista
OEM BIOS simulator crack, is a software boot loader or boot manager
that simulates and emulates BIOS that supports activation for Windows Vista
to crack and bypass the activation requirement. Invented by Chinese
hackers, Vista Loader version 1.0 has been upgraded to Vista Loader
2.0. The working theory of the Vista crack is still the same. Before
Windows Vista is loaded into memory, a special bootloader that will
modify the computer memory to add in specific byte code to emulate BIOS of a OEM brand PC, in order to crack Windows Vista activation.
The previous Vista crack Softmod image
file is actually Vista Loader 1.0 that based on DOS operating system.
The crack has two branches and was named as softmod-l or softmod-b
(both is the same with minor details differences), and also was
massively renamed to other various names by users, and released in ISO format on 17th Februar 2007.
The new Vista Loader version 2.0 completely rewritten the code, eliminate the usage of DOS, and increase the usage of GRUB4DOS
boot manager, a enhanced universal boot loader with built-in BIOS disk
emulation and ATAPI CDROM driver that based on multiboot and operting
system boot loader GRUB, GRand Unified Bootloader. Other improvement
includes better BIOS emulation method to make the emulated BIOS
compatible with previously unsupported OEM branded computer.
Features of Vista Loader 2.0
- Eliminate the need to physically modify real BIOS to crack Windows Vista SLP 2.0 verification and activate the operating system.
- Vista Loader 2.0 itself is a multiboot boot loader that contains
all functionalities of GRUB4DOS, with ability to boot off DOS/LINUX, or
via Windows boot manager/syslinux/lilo, or from MBR/CD.
- The OEM BIOS emulator is loaded before operating system is called,
thus it’s safe and reliable and highly compliance. Beside, MBR (master
boot record) may no longer needs to be modified.
- Vista Loader 2.0 does not use too much system resources, and does not conflict the software application installed in the OS.
- Support 32-bit and 64-bit (x86 and x54) Windows Vista, unlike OEM BIOS Emulation Toolkit 1.0 by Paradox which supports only 32-bit Vista.
- It’s possible that the crack will work on future operating system
that uses SLP 2.0 activation technology, such as Windows Longhorn
Server, with just the minor change to the value data that needs for
verification and validation.
- Does not slow down the boot up process. Benchmark shows loader
increases just additional 1 second to the booting process of computer.
- Simulate and emulate a few branded OEM BIOS. Currently supported
are Acer, ASUS, Dell, HP, Lenovo and Sony. It’s customizable by user to
increase the supported OEM brand.
- Automatically install the corresponding OEM certification for the brand.
- Can be used as bootable CD to activate Windows Vista, so that no modification or alteration is done to the hard disk drive.
Changelog and Improvements in Vista Loader 2.0
- Compile together with GRUB4DOS so ultra fast startup (1 second).
- Install to multiple boot volume, increase fault tolerance
capability so that even if software mod program is deleted, Windows
Vista can be loaded normally (works in NTFS partition only).
- Increase stability and compatibility with no change to ACPI table to support branded machine that not successful in version 1.0.
- Support many OEMs or brands. Inside the data folder of the archive contains all supported SLIC BIOS file and XRM-MS certificate file.
- Automatically load and install OEM certificate.
- Improve booting compatibility to support multiboot environment.
- Corrects error in occupying 1M to 2M memory.
- Corrects failure in software driver.
- The DOS message should no longer appear.
- No longer has boot option menu unless user create one.
Features and Improvements of Vista Loader 2.1
- Improved compatibility so that whenever OEM Vista BIOS emu crack
with Vista Loader version 2.0 doesn’t work, fall back to Vista Loader
version 1.0 method (more commonly known as softmod).
- Bug fixes.
Update: Download Vista Loader 2.1.2
Download Vista Loader 2.1
Download Vista Loader 2.0
After installing software based mod program for OEM BIOS crack,
there is only one file that is critical, that is grldr, called by
BOOT.INI of Windows to load the multiboot boot manager. grldr is the
main file for GRUB4DOS which include all functionalities. Preprogrammed
defalt leads the built-in menu to emulate the BIOS and loads Windows
Vista installed on hard disk drive.
There are 2 methods to apply Vista Loader 2.0 as Vista crack, i.e. install directly to hard disk, or create bootable CD.
Method 1 - Bootable CD
Install software mod Vista Loader OEM BIOS emulator to a CD, and use
the bootable CD to boot up the computer and then load the Windows Vista
operating system to achieve the aim to activate Windows Vista without
any changes to hard disk drive. It’s the safest method, although a bit
troublesome as need to boot up from CD-ROM or DVD-ROM drive after every
reboot.
- Click on Start button, then select “All Programs” -> “Accessories” -> “Command Promt”. You may need to turn of UAC or open command prompt with administrator rights.
- Change directory to the folder where you extracted the contents of vistaloader.rar.
- Enter the following command in the command prompt:
makeldr <oem_brand>
Replace <oem_brand> with the supported OEM name that you
prefer. For example “makeldr lenovo” will install BIOS emulator that
emulates Lenovo in SLIC table, and will need to you use OEM certificate
for Lenovo. If no option is keyed in, the default installation is ASUS.
Supported OEMs currently are Acer, ASUS, Dell, HP, Lenovo and Sony.
It’s also possible to place the files from other manufacturers
inside the \data folder according the format to add in the support for
other brands.
- After the command finished executing, a file named “grldr” will be created.
- Using ISO image editing or creating software such as UltraISO,
add grldr file as the boot or load sector document. Other documents
such as signed OEM certificate, readme document and frequently used
utilities can be added to the CD ISO image too.
- Save the ISO image file.
- Burn or write the ISO image file to CD by using your favorite optical disc burning and authoring software such as Ahead Nero, Alcohol 120%, Roxio Easy Media Creator and etc.
- Install the OEM certificate to your Windows Vista system if
applicable. Pick OEM certificate that corresponding to the brand you
chose when creating the OEM BIOS emu CD loader. Use the following
command to install the certificate to SLMgr (supported certificates
contains in the archive, or you can download from here):
slmgr.vbs -ilc <folder of extracted Vista Loader>\data\<OEM brand name>;.xrm-ms
- In applicable, change Windos Vista product key to corresponding generic OEM CD key (CD-key.txt).
Method 2 - Install Vista Load 2.0 on Hard Disk
A more dangerous method as any wrong move can render your computer
unbootable. But it’s easier as there is no need to use CD to boot up
the computer after each restart.
- If you have install softmod Vista crack (vstaldr or Vista Loader 1.0),
uninstall the crack by running the uninstall.cmd contained in the
softmod.iso or softmod.rar archive that you downloaded, or visit manual steps to uninstall Vista Loader 1.0 (vstaldr of softmod).
- Click on Start button, then select “All Programs” ->
Accessories, and right click on “Command Prompt”. Click on “Run as
Administrator” on the right click menu, and confirm the UAC security
warning.
- Change directory to the folder where you extracted the contents of vistaloader.rar.
- Issue the install setup command with the following syntax:
install <OEM brand name>
Replace <OEM brand name> with the brand name that you want to
emulate in BIOS. For example, “install lenovo” will emulate the BIOS
with Lenovo OEM ID.
If you just type in “install” and press Enter, the default OEM is
used, which is ASUS. Supported OEMs currently are Acer, ASUS, Dell, HP,
Lenovo and Sony.
It’s also possible to place the files from other manufacturers
inside the \data folder according the format to add in the support for
other brands.
- Installer will install the software based BIOS mod
program based on the selected OEM brand, and then automatically install
the OEM certificate for the chosen brand.
- After installation of the crack, restart Vista system.
- Check the activation status of Windows Vista. If it’s not yet activated, try to change the product key to respective OEM CD key (CD-Key.txt).
Note: Vista Loader 2.0 setup will install loader EMU crack into each
and every hard drives that contains Windows Vista installation. During
uninstallation, all will be uninstall too. However, if installation for
certain drivers fail, the failure can be ignored as long as the hard
drive is not boot or system volume.
Uninstall Vista Loader 2.0
The steps to uninstall Vista Loader 2.0 is similar to uninstallation instruction for softmod 1.0.
- Open elevated command prompt.
- Change directory to the extracted Vista Loader 2.0 folder.
- Enter the command: uninstall
Emergency recovery method in cause computer fault or malfunction after crack installed
If you facing any problem or error and unable to log on to Windows
Vista after using Vista Loader crack, try to patch the system by
uninstall Vista Loader with the following steps:
- Boot up the computer with Windows Vista installation DVD.
- Choose Install.
- At the screen where you’re asked to input product key, press Shift + F10 keyboard shortcut to trigger command prompt.
- Change directory to the folder where Vista Loader 2.0 is extracted.
- Execute uninstall command.
Note:
- If you’re familiar with GRUB or GRUB4DOS, you can create your own
self defined menu list. Simply create a menu.lst file and place in the
boot volume/sector. The command to emulate BIOS (acpi) must be added,
else Vista crack will fail.
- The Vista Loader software BIOS emu only support operating system
that uses SLP 2.0 technology, where the first OS is Windows Vista.
Thus, OEM version of Windows XP is not activatable with this hack.
- The BIOS emu will not affect software compatibility on Windows Vista.
- The program only input the OEM verification data value into memory
during the initialization phase, and will not be stayed resident in the
memory, and also will not read anything from the disk.
- There are only 2 possible failures, i.e operating system unable to
boot up or operating system is not activated. Make sure that you
following the correct procedures.
- It’s possible to create a bootable USB with Vista Loader to crack Windows Vista activation. However, it’s more complicated.
- This program is recommended only in testing environment. Usage is
restricted to technology research. Not allow to use in pirated
software. Please support genuine software.
Disclaimer: This article is for education and informational purpose only. Please support genuine software. You can now buy Windows Vista online.
Get help or contribute tips or tricks at
My Digital Life Forums.
Related Articles
This entry was posted on Saturday, March 10th, 2007 at 6:33 pm and is filed under Windows Vista. You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
March 10th, 2007 20:06
Is this version right for Nforce Mobos ?
March 10th, 2007 20:35
Ok, i’ve just test Vista Loader 2.0, it’s allright on my A8N32SLI (nforce4 chipset).
The paradox version crash with o Blue screen, but this release IS COMPATIBLE !
So Good job, 5 days only for this version.
March 10th, 2007 21:40
Does anyone know how to create a bootable usb device on this release?
March 10th, 2007 21:54
hello.
i have an asus oem serial number on my vista.
i install that on my hard disk using install asus
on the command prompt i have :
Updated NTFS filesystem bootcode. The update may be unreliable since the
volume could not be locked during the update:
Accs refus.
(in french acces refus means acces denied)
then everything works ok…but vista still want me to activate.
Do you know why ?
Thank you.
March 10th, 2007 22:57
Is it compatible with an other boot-manager like BootIt-NG (http://www.terabyteunlimited.com) ? Thanks.
March 10th, 2007 23:00
Anyone could explain how to make Boot CD in french ?
Why after every reboot I will have to boot on CD-Rome Drive ?
I don’t understand…
March 10th, 2007 23:03
I have already make the solution with modified Bios with SLIC ACPI table on my A8N SLI deluxe.
and 2 command prompt.
What is the best solution ?
March 10th, 2007 23:11
Anyone could explain me exactly Method 1 Step 5-6 with UltraISO ?
March 11th, 2007 00:05
For USB Drive booting:
Format your usb flash drive with: HP Drive Key Boot Utility. Format as floppy disk and select the image you can download on this link:
http://depositfiles.com/files/684472
Now you can also boot from USB!
This image is prepared with the ASUS oem brand.
March 11th, 2007 00:39
Parisien:
As tu fait l’etape 7 ?
March 11th, 2007 01:37
Manumaster How to copy .img file to USB Drive ?
Do you put the Ultimate Porduct Key ?
Could you explain me, I connect my USB drive after Vista installation, and I reboot my PC, boot on my USB drive, wait for crack installation, and deconnect my USB Drive and reboot my pc.
and after my Vista will be activated ?
March 11th, 2007 02:40
@11
You have to HP Drive Key Boot Utility. An utility to make bootable usb drives. After you created the bootable usb drive, you have to keep it connected during each reboot. It’s just instead of the boot cd.
March 11th, 2007 03:44
Now I have WinXP, but I will install vista very soon.
1/ I Intall Vista and no enter any Porduct Key at Install
2/ After install is connect my USB Drive I have already repare with your vistaloader2_usb, and I reboot my computer.
3/ My computer boot on my USB Drive and wait to finish command prompt.
4/ When it’s finish I deconnect my USB Drive and reboot my Computer.
—> Now my Vista is perfectly activated.
It’s good ? I have understand ?
March 11th, 2007 04:21
Works great on my Intel 915gro mobo!
Am still getting the dos boot screen as I did with ver.1 tho
thanks for a great alternative
March 11th, 2007 06:46
Does anyone have a Sony OEM key for Vista Business?
March 11th, 2007 20:00
Trying to get this to work.
This is the code I get when I run the install.
[ Installing to drive D:
data\vstaldr1
data\Asus.bin
data\vstaldr2
1 file(s) copied.
Target volumes will be updated with BOOTMGR compatible bootcode.
D: (\\?\Volume{bd35e79c-cfa6-11db-b900-806e6f6e6963})
Updated NTFS filesystem bootcode. The update may be unreliable since the
volume could not be locked during the update:
Access is denied.
Bootcode was successfully updated on all targeted volumes.
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.
License file data\Asus.xrm-ms installed successfully.]
I am pretty confident I am following the install procedure correctly.
Is anyone else having issues?
I used this release. Microsoft.Windows.Vista.RTM.32Bit.and.64Bit.AIO
Im sure its an OEM version
March 12th, 2007 03:31
Finally. This actually works.
March 12th, 2007 07:52
I got error:
Missing helper.
what i do wrong?
March 12th, 2007 11:06
mirror:
http://www.pirateshare.net/?id=838233
+includes an offline version of this page.
March 12th, 2007 11:30
explanation of step 5 in method 1:
1> rename grldr to grldr.bif
2> run UltraISO. goto menu bar. click on Bootable ? Load Boot File…, open grldr.bif
3> no need to add other files.
4> goto menu bar, click on File ? Save As…
5> burn the iso image you have just saved.
March 12th, 2007 19:58
as noname said I renamed file to grldr.bif inserted it using ultraISO, burned the ISO file using nero, but this time I get nothing. It just does not work.
I tired to burn the grldr.bif as bootable cd in nero with expert emulation settings turned off.
Now I get this error:
Missing operating system.
As I said before I renamef the file grldr to grldr.bif I was getting error:
Missing helper.
What I do WRONG here????
Can someone please share a complete bootable ISO image that I could burn to CD?
——————————————-
I also tried the USB boot image by Manumaster posted but I get error:
disk error. If I set my usb flash drive to boot from.
Any help will be appreciated.
March 12th, 2007 20:18
So what is the difference with this new version ?
http://www.live-share.com/files/176395/vistaloader_2.1.0.rar.html
March 12th, 2007 21:05
This new version 2.1.0 also works but now even shows an SLIC table using EVEREST 2007:
[ SLIC: Software Licensing Description Table ]
ACPI Table Properties:
ACPI Signature SLIC
Table Description Software Licensing Description Table
Memory Address 3FFC5B0Ah
Table Length 374 bytes
OEM ID _ASUS_
OEM Table ID Notebook
Creator ID MSFT
And it’s not shown as emulated !
Link: http://www.live-share.com/files/176395/vistaloader_2.1.0.rar.html
March 12th, 2007 21:44
Method 1 worked perfectly for me.
Follow the steps I posted earlier to make a bootable CD.
Before restart your computer and let it boot from CD, you must also complete step 8 & 9 in Method 1. Otherwise the activation doesn’t work.
March 12th, 2007 22:09
mirror of v2.1.0:
http://www.pirateshare.net/?id=939510
+includes updated offline version of this page.
March 12th, 2007 22:32
I try it, installation bugs (access denied on XP partition).
The PC don’t boot.
1st parition : XP
2nd parition : Vista
Asus A8R32-MVP Deluxe
March 12th, 2007 22:54
Tried the new v2.1.0 and the same problem:
If I burn the grldr.bif with nero as boot sector image I get error:
Missing helper.
If I use Ultra ISO v8 to include grldr.bif as bootsector information then save the ISO file and burn it using nero. I get nothing the computer loads vista and I see 30 day trial.
If I press F8 during boot and select my DVD-drive the error:
Reboot and select proper boot device
or insert boot media in selected boot device and press any key
—————————————-
Loader v 1.0 works fine however either the files in loader v2 are corrrupted or I don’t know why it will not work.
—————————————-
Perhaps someone can share ISO image ready to burn wirh nero for ASUS?
March 12th, 2007 23:28
Any Illegal files hosted or linked to a hosting site from here.
Well let me check U ASSCracks.
I am gonna report you all to Microsoft (TM) and they will take good care of you, AND SUE YOU ALL hahahahahahahaha
bwa bye CRACK TEAM CHIEFS
hahahahahahaha U Asshole losers, Microsofts gonna kick yo ass and kick yo butt.
I served my justice for the day!!! Feeling very proud!!!
March 12th, 2007 23:37
I hate guys like anonymous cop. Always tattletaleing like a big pussy, whining about everything. He’d probably sell his friend out for smoking weed. He probably drives a Beamer while talking on a cellphone, and doesn’t use a turn signal either. Go complain that your pussy hurts to someone else loser. Stupid jealous NARC because he’s not smart enough to even run a computer let alone run Windows Vista.
March 12th, 2007 23:40
Another thing. I just reported the file http://depositfiles.com/en/files/689581
hahahahahahahahaha
Bye bye Vista Crack Team Chiefs. I am gonna force u to obey the law.
It’s against the law to host illegal files even for educational purposes or is that what you had in mind You PIRATES.
hahahahahahahahahaha we win
!!!!!!!!The Police WIN!!!!!!!!
March 12th, 2007 23:44
This guy couldn’t get laid to save his life, that’s why he does stuff like this.
March 12th, 2007 23:51
[quote]
This guy couldnt get laid to save his life, thats why he does stuff like this.
[/quote]
I get laid dozens of times. hahaha
The police always get laid.
Thats what LAPD Means is Laid and Perfect Police Department.
March 12th, 2007 23:56
REPORTED. Both Loader versions reported as illegal and will be taken down or all IPs downloading that file will BE ARESTED BY THE POLICE.
YOU WILL GOTO JAIL U CRACK TEAM CHIEFS
March 13th, 2007 08:18
“Thats what LAPD Means is Laid and Perfect Police Department.”
Wow… you don
t even kknow how to comprehend. You basically just said :APPD. Dumbass.
Anyways, read the disclaimer: Disclaimer: This article is for education and informational purpose only. Please support genuine software. You can now buy Windows Vista online.
March 13th, 2007 08:22
He’s just mad because he has a shitty job as a cop since he could only manage to graduate highschool or maybe even not at all. Too bad he couldn’t become smart and have a good techie job like the majority of us on here and make real money. Besides, only 14 year old kids would brag on here that they “reported” something like that. Real people who are going to report warez or cracks will just do it and not need any validation whatever. They just do it. You sir are just an attention whore.
March 13th, 2007 08:31
I have tried this on my old nforce mobo, (method 2). The bootloader installed correctly, but no matter what key I try to use, windows doesnt activate - if I am connected to the internet it says “windows key already in use”. One problem I did notice is that when I left my DVD in the drive it tried to write the files to my dvd-drive (obviously read only).
Should I keep my internet connected or disconnected when running this patch ? Also does it matter what OEM bios to use ? I have only tried the sony so far but it doesnt seem to be working. Is there a minimum number of times I can change the product key ?
March 13th, 2007 09:37
[quote]You sir are just an attention whore.[/quote]
My real age is 16.
and yes I am a fucken attention whore!!!
no one loves me. So I talk fucken dirty and report you all.
hahaha.
I got attacked so much I will finally get my revenge on the internet by policing you all.
bye bye motherfuckers
March 13th, 2007 12:37
bye, bye indeed.
March 14th, 2007 01:26
What…. no replies
Does that mean that it does not work for other s too.
March 14th, 2007 08:21
How about making this unattended.
So during vista setup cracks gets aplied.
After setuo and reboot, pc is activated.
March 14th, 2007 21:44
I’m back, well I’ve just cut off the power and restart, finaly all done and actived.
March 15th, 2007 05:52
How to make image to write to USB bootable Flash?????
March 15th, 2007 09:29
32/64 version
http://rs20.rapidshare.com/files/21067654/OEMActivatorVista3264.rar
March 16th, 2007 01:44
So can anyone make new version 2.1.0 bootable USB flash IMAGE??
Better tell how to make it? What programs to use?
March 16th, 2007 14:26
One more thing can do is, create virtual A: RAM disk and mount ISO image on it and load it in BOOTIT NG boot manager with Booting A: first
March 19th, 2007 01:06
[…] New: Vista Loader 2.0 software based OEM BIOS Emu […]
March 19th, 2007 03:49
Does any one has a mirror to download Vista Loader 2.1 ?
March 19th, 2007 07:50
[…] OEM BIOS emulator which is of Emu Loader type such as Vista Loader 1.0 (vstladr of softmod.iso) and Vista Loader 2.0 (grldr), you may face the problem that your computer unable to boot up anymore. Unlike Paradox OEM […]
March 19th, 2007 23:20
[…] here for detailed crack instruction and more features […]
March 20th, 2007 03:02
Note a good idea to upload files to depositefiles.com. This shit host are always in down, or remove your crack, or like this “All slots for your country is empty” or something else…. Please, upload this for example rapidshare.com or fileho.com.
I think, fileho.com is the best.
March 21st, 2007 00:29
[…] here for detailed crack instruction and more features […]
March 28th, 2007 19:22
[…] dicas e opes de validao pela BIOS, d uma olhada neste blog aqui (em […]
March 29th, 2007 02:25
i ran thru this step by step, but it failed when i tried to boot up. it booted into grub and had all sorts of errors. my installation is on a laptop, one partition (c:) with only vista installed (it is however a dynamic disk). could someone please tell me why this crack wont work? neither moethod 1 or 2 works for me.
April 12th, 2007 17:48
the admin at mydigitallife is a bitch deleting posts because he does not want ppl to know he is a fucking dork retard who only knows to critisize as if he is better.. FUCK YOURSELF DUDE
April 13th, 2007 02:25
Trolly, deleting what posts?
April 13th, 2007 13:12
[…] Loader 1.0" that was devised by Chinese hackers, according to a March 10 post on the My Digital Life blog. Vista Loader, the post explained, simulates an OEM motherboard’s basic input-output system, […]
April 13th, 2007 19:43
[…] of the ‘Vista Loader 1.0′ that was devised by Chinese hackers, according to a 10 March post on the My Digital Life blog. Vista Loader, the post explained, simulates an OEM motherboard’s basic input-output system, […]
April 13th, 2007 20:29
[…] has tacitly acknowledged that the approach described in this My Digital Life blog post works and that they do not have a fix for it. The method involves emulating the BIOS of […]
April 13th, 2007 22:24
[…] parece sel que ya ha salido un crack para el Vista, podis ver ms informacin aqu o aqu, no hay que correr mucho pues a Microsoft no parece preocuparles (normal, vamos… no […]
April 14th, 2007 19:14
[…] Microsoft ha admitido que el hack existe y funciona. El mtodo, que ha sido publicado en MyDigitalLife, es por tanto una de las formas que parecen garantizar que las copias piratas de Windows Vista que […]
April 14th, 2007 19:21
[…] Vista Loader 2.0 [My Digital Life]. […]
April 15th, 2007 00:08
[…] of the “Vista Loader 1.0″ that was devised by Chinese hackers, according to a March 10 post on the My Digital Life blog. Vista Loader, the post explained, simulates an OEM motherboard’s basic input-output system, […]
April 15th, 2007 08:52
Is this method prior to installing vista or after installing vista?
it seems like its after instlling vista
i cant get vista to instal i have a Abit UL8 mobo and vista saays i must have ACPI , and says my mobo doesnt have it
April 23rd, 2007 12:36
[…] Vista Loader 2.0 [My Digital Life]. […]
April 25th, 2007 11:43
[…] activate OEM version of Windows Vista, try the ready-mod BIOS (with static address), software based Vista Loader OEM BIOS emulator, or software based OEM BIOS Emulation Toolkit. Other popular Vista crack include TimerLock which […]
May 4th, 2007 03:36
Hi,
I did this and it worked perfect for about 1-2 days
:) BUT NOW im back to having to activate in 28 days? Is there any reason that it would revert back to that? I did change my BIOs password today? Would that affect it?
Thanks
October 5th, 2007 21:43
Winodws est Activ
Meri mydigitallife
November 5th, 2007 01:50
[…] dicas de validao pela BIOS neste blog aqui (em […]